How to make a leash for a rabbit?
Domestic rabbits were not always as familiar pets as dogs or cats, and the same turtles. But today, more and more children and adults choose these lop-eared animals as pets. After all, they are so cute and beautiful.
Rabbits are very quickly and easily tamed, by their nature they are affectionate, and their touching touch causes the most positive emotions both from the owners of these animals and from everyone around them. Rabbits live well in an apartment, but, like any other pet, they require periodic walking. In winter, they will be uncomfortable on the street, and in summer they will be happy to pluck fresh green grass. For safe and calm walks you will need a leash for the rabbit.
A good leash for a decorative rabbit should not be pulled on the neck of the animal – so it will turn into a noose. To prevent this from happening, he should fasten with a buckle. Part of the leash falling on the back of the rabbit is made in the form of an “H” when viewed from the side.
They can be frightened by other walking animals – cats or dogs, as well as unexpected loud noises: screams or car alarms.
In order not to raise the question of how much a leash for a rabbit costs, you can make it with your own hands. At the same time, the made leash (it consists of a harness and a belt) must be reliable and convenient for the rabbit. With sudden movements, the animal, on the one hand, should not slip out of the leash, and, on the other hand, should not strangle itself. Leashes should gently grasp the back and neck of the animal, fixing it, but not causing discomfort.
Actually, the leash consists of two parts – harness and belt. Let’s start with the harness. The first step is to measure the girth of the chest and neck of the animal. A tolerance of 2-3 cm is added to the obtained sizes – on the seams, as well as on the "outgrowth" of the rabbit. That he was not crowded.
Of course, rabbits. these are not the fastest animals, but they can quickly jump from the owners and get lost. They can run away not because they strive for freedom, but because they are rather fearful creatures. That is, leashes are very relevant in this case.
The edges of the two parts of the tape are seared so that they do not open further; half of the fastener is sewn to one of them. fastex, which consists of two parts. Limiters are put on parts of the tape – they will help to adjust the harness to the desired size. Then the second part of the fastener is sewn. The resulting parts are connected by a jumper on which a half ring is worn – with its help the harness will be attached to the belt. The length of the jumper is equal to the distance from the chest of the rabbit behind the front paws to the neck of the animal.
After the harness, a leash strap is made. A loop is made from one edge of it, allowing you to conveniently hold the leash in your hand.
A carabiner is attached to the other edge, which will snap into the half ring on the bridge before walking – it should always be on the back of the rabbit.
After making the leash, it’s best to give the rabbit time to get used to his new outfit. To do this, wear a leash at home.
A few days after the rabbit gets used to the leash, you can lead him in a new leash for a street walk. And if this is allowed to be done also by young children, they will simply be crazy about this tiny and very sweet creature.
How to wear a harness on a rabbit. How to dress. KakPravilno-Sdelat.ru
»How to dress
Leash for the rabbit: how to wear, how to do it yourself
Many residents of apartment buildings and private houses have pets. In addition to ordinary cats, dogs and birds, keeping rabbits is popular. In warm time, they are regularly walking. To do this, you need a special leash for the rabbit. We will talk about the harness for rabbits, how to make it yourself and how to wear it correctly, in this article.
How to wear
In order for the animal to develop correctly and have good immunity, it needs walks when kept at home. One of the main conditions for walking is a small number of passers-by. Rabbits are very cowardly. Dogs, cats, sharp sounds, car exhausts will cause a pet’s hysteria. It is important to walk the animal on a rabbit leash so that it does not run away. At the same time, the harness for the rabbit must be properly worn so that it does not strangle itself in fright.
Before you start walking your pet, you need to observe some conditions. Firstly, he must reach four months of age (to be vaccinated, to be large enough for harnessing, to eat green grass). Secondly, you need to find the right time for walking (morning, evening) and place (grass should not be wet). Thirdly, it is worth having a good transportation. And finally, a harness for walking.
Shop harnesses are not always well made. For example, they do not recommend using a rope leash – the pet will easily get out of it and run away in a panic.
The usual harness for a rabbit looks like two open rings. To correctly put it on the animal, take it in your hands, put a smaller ring on the neck of the animal and fasten it. You need to check how she sits – do not tighten too tight. A finger should pass between the neck and harness. The second strap is passed under the stomach, fastens. She should not hang out and her correct location is on her back. Carabiner wiring fastens to the back.
Immediately lead the pet into the street is impossible. The animal must get used to its equipment. How to train a rabbit for a harness? Everything is simple # 8212; in the first few days, wear it at home, without a leash. Gradually increase the time that the animal in the harness is at home. When the eared one gets used to his uniform, he can be taken for a walk.
It should be remembered that the risk of escape is not the only danger for a pet on the street. He must be vaccinated against diseases at the veterinarian.
For walking, choose suitable places where there is no too strong wind. Rain is contraindicated for the animal, as is sunshine or severe frost and snow. Remember also that the trip in transport for the animal is a lot of stress, it should not be too long.
The best option for a leash for a rabbit is considered harness-clothes. It is almost impossible to get out of it, while there is no risk that the animal will squeeze its throat too much in fright. In the mesh structure of such a harness, the animal feels comfortable. It is simply worn – fastens first on the stomach, then on the neck. The advantage of this device is that in case of danger (for example, when dogs appear), the owner can calmly raise the animal by the leash.
Making the harness yourself
Step by step explain how to make a leash for the rabbit. First you need to measure the girth of the neck, chest of the pet and the distance between the chest and neck. Any soft fabric, long braid or thick threads are suitable for harnessing. On the inside, sew the harness with a cloth so that the animal does not rub. Connect the straps with a carabiner (4 cm long), you will also need several small rings for this.
Cut the braid into two strips. One strip is calculated as the distance between the neck and chest 10 cm. Second: chest girth neck circumference 20 cm. The second strip is sewn with a soft lining fabric from the inside and make a double loop on one side into which the ring is threaded. Where there is a bend, a second seam is made – a buckle is attached to it. Cut the other end of the tape obliquely. Make a few holes at a distance of 1 cm from the cut end with an awl. The first strip is also lined inside and at the ends with lining fabric.
Then all the details are connected, and the leash is fixed. Do-it-yourself harness for the rabbit. It remains to train her pet and start walking. Soon you will see that your animal has become more active and healthy.