Harnesses For Rabbits

Comfort and safety on a walk will be ensured by a correctly selected harness for a rabbit. In the warm season, eared pets need fresh air and green grass. Due to the fearful nature, animals can get hurt, run away and get lost. Therefore, it is important to prevent such consequences in advance. The construction itself and the leash should be comfortable and limit movement to a minimum. On the other hand, they allow you to closely monitor your pet.

Which harness is better

Rabbit harness for walking – a necessary attribute of a full walk, which helps maintain the health, immunity of animals. The construction needs a solid one. Leashes for rabbits are also characterized by reliable fasteners. In this case, suitable models correspond to the size of the body of a particular rabbit.

A harness in the form of a T-shirt is the best option for eared animals. Even in stressful situations, animals will not tighten it tightly on their neck, will not be released from human control and will not run away where they look.

An important advantage of this device is the ability, if necessary, to pull the animal by the strap, quickly pick it up. Such “clothes” are easy to put on with minimal skills. This requires gently fastening it on the stomach, and then on the neck.

Harnesses For Rabbits

How to wear

Between the collar and the neck, the index finger should calmly pass. An optional nylon strap provides a snug fit in the chest and abdomen. From the back there is a special carabiner, to which a leash is fastened.

The rope structure consists of nylon straps that look on the side of the animal’s body like the letter “H”. When choosing this model, it is important to choose the right size. In no case should such a “dress” be tightly enveloped in the body. Ideally, the belts should only fit against it. It is equally important that they can be easily fastened.

Read more:  How Rabbits Move

Putting the rope on the rabbit, you need to start from the neck, skip the second strap under the lower abdomen, fasten it. After that, from the back, attach a belt that controls rabbit movements.

Harnesses For Rabbits

We train a pet for uniform

It is recommended to train an eared pet to a leash and harness as early as possible. This must be done slowly. The procedure itself can take from four days to one week.

Initially, it is better to wear a harness in the usual home environment, giving the rabbit the opportunity to be in it for only a few minutes. Every day the amount of time is increased. When the earser stops responding to it, you can fasten the leash, but do not use it yet.

Let the leash reach for the moving rabbit on the floor or the ground. Over the course of several days, the training time should also be gradually increased. Only after the animal gets used to such ammunition can it be carefully withdrawn from the premises to the street. At first it’s better not to go far from the animal, especially not to pull the leash with effort.

You can choose a quiet, safe place covered with tall grass, drive a small peg and let the animal enjoy nature. In this case, it is better not to lose sight of him. Wear the harness carefully and gently so as not to cause the animal fear, anxiety, pain or discomfort.

This procedure should be associated with a subsequent pleasant pastime, therefore it is recommended to walk the rabbit in calm, clear weather. For a greater sense of freedom, you can use the tape measure leash.

Read more:  The Device Of The Mother Liquor For Rabbits And How To Do It Yourself

How and where is it better to walk the rabbit

Walking a pet-eared pet is required to be taken with all seriousness. The rabbit is very shy. It does not tolerate long roads, drafts, direct sunlight, rain, snow.

Harnesses For Rabbits

Before you start introducing the animal to walks in the fresh air, you should adhere to the following rules:

  • it is undesirable to take too small animals for a walk up to four months of age;
  • a pet should be vaccinated;
  • the rabbit’s diet should include green grass at the time of the walk;
  • it is important to choose the best time and a safe quiet place for walking with dry grass without dew;
  • care must be taken while walking;
  • it is better to carry the animal in your arms or inside a special carrier to the place of walking.

Due to the extreme sensitivity of the domestic rabbit, for the most insignificant reason, he can panic, get scared. Sometimes in such situations, a rabbit leash that is not properly fastened becomes a death stranglehold.

Harnesses For Rabbits

On the other hand, stress, feverish flight of an eared pet often leads to fractures, injuries to internal organs. Thus, on a walk this pet is in need of care, increased attention.

Tools and materials for making a harness

To do this, you will need tools such as scissors, an awl, a sewing machine, a centimeter. In addition, the materials need threads, yarn, braid, soft fabric, several small rings.

Harnesses For Rabbits

It is important to choose soft materials that are “friendly” to rabbit skin. For example, flannel or drape. It is not recommended to focus on the rope structure, since it is not very reliable.

Step by step sewing instructions

Before sewing, carefully measure the body parameters of an eared pet. The circumference of the waist, chest and neck, the distance from the neck to the waist are the main measurements necessary for tailoring a quality rabbit harness.

Read more:  Shopping List For Your New Bunny

First you need to cut off two strips of tape to precisely fit the animal’s waist and chest. To calculate the length of the first, you need to get the sum of the girths of the chest and waist, add 20 cm to the seams to it.

Harnesses For Rabbits

The second strip should correspond to a length 10 cm greater than the distance between the neck and chest of the rabbit. Then the first strip must be sewn inside with a special lining fabric.

The next step is to make a double loop on one side, into which to pass the ring. Measure the distance in the bend area and fix it. To do this, at the fracture site, you need to make a second seam by attaching a buckle to it.

Last stages

On the other side of the braid you need to make an oblique incision. At a distance of about 1 cm from the cut end, pierce several holes with an awl. Then trim the ends and the inside with a soft lining.

Harnesses For Rabbits

At the last stage, you need to connect together all the components of the structure, secure the leash to the ring with a carabiner. Accurately made in accordance with the instructions, the harness will add many positive moments to the walk for an eared pet and its owner.

Do you know how best and safest to walk a rabbit? If this article aroused interest, answered important questions about the optimal design of the harness, then please like it.

Share interesting information online. Leave your comments.

Pin It on Pinterest

Share This